Best 2.2 Ecotec Water Pump Tool in 2022 [*Top Picks*]

Looking for the best 2.2 ecotec water pump tool on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.

7196 Reviews Scanned

  • DPTOOL Water Pump Sprocket Retainer Holding Tool Compatible with GM Ecotec 2.2 2.4 Replacement for Chevrolet Oldsmobile Pontiac Saab Saturn Platforms Cobalt
    Bestseller #1
    DPTOOL Water Pump Sprocket Retainer Holding Tool Compatible with GM Ecotec 2.2 2.4 Replacement for Chevrolet Oldsmobile Pontiac Saab Saturn Platforms Cobalt (404)
      Application: This water pump holder tool fit GM 2.2L 2.4L Ecotec engine, Compatible with Chevrolet/ Oldsmobile /Pontiac/Saab and Saturn Platforms, Service range 2002 to current Safe Not Dropping Bolts: This water pump holder tool is superior to the half-round models and superior to the units with integrated holding pins. because the half round tools you still run the risk of dropping two of the bolts in to the timing cover, but this tool works well to keep every thing in place and keep parts from falling into the timing chain cover Must Have Tool for Replace Water Pump: Had to have this tool if you need to change your water pump, and didn’t have any trouble. because when you change the water pump, this water pump holder tool held the sprocket in place perfectly, and zero problems Easy To Use: No issues of losing the timing gear bolts when removing them from the water pump, a real time saver and very helpful to finishing the water pump replacement on GM ecotec 2.2 and also 2.4 engines, save much time Quality Guarante: Our 2.2L 2.4L Ecotec water pump holder tool made ofhigher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life, and we offer lifetime warranty
  • Performance Tool W89210 Water Pump Sprocket Holder For GM Ecotec (GM 2.2L and 2.4L Chevrolet, Oldsmobile, Saturn, Pontiac Ecotec engines)
    Bestseller #1
    Performance Tool W89210 Water Pump Sprocket Holder For GM Ecotec (GM 2.2L and 2.4L Chevrolet, Oldsmobile, Saturn, Pontiac Ecotec engines) (386)
      Holds Water Pump Sprocket on 2002 to current GM Ecotec motors so water pump can be serviced. Special design allows easy application regardless of sprocket orientation. Saves costly loss of time by holding the water pump sprocket in place while removing pump. Use on GM 2.2L and 2.4L Chevrolet, Oldsmobile, Saturn, Pontiac Ecotec engines.
  • BTSHUB Water Pump Sprocket Retainer Holding Tool Compatible for GMVAUXHALL OPEL 2.2 Chain Drive Garage Tools, Auto & Truck Maintenance
    Bestseller #1
    BTSHUB Water Pump Sprocket Retainer Holding Tool Compatible for GMVAUXHALL OPEL 2.2 Chain Drive Garage Tools, Auto & Truck Maintenance (275)
      The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also suitable for Chevrolet Oldsmobile Pontiac and Saturn vehicles Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket; Use included bolts and cover bolts to install the tool Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length
  • ABN Water Pump Sprocket Retainer Tool - Full-Circle Sprocket Holding Tool Compatible with 2.2L GM Vauxhall Opel
    Bestseller #1
    ABN Water Pump Sprocket Retainer Tool - Full-Circle Sprocket Holding Tool Compatible with 2.2L GM Vauxhall Opel (15053)
      [Protect Your Vehicle from Engine Damage] Secure the water pump sprocket with the ABN Water Pump Sprocket Holder to prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments [Ensure Easy Maintenance] Remove the access plate then line up holes on the water pump tool to your sprocket; Use included bolts and cover bolts to install the tool; Full-circle design covers entire access plate area to prevent other bolts and sockets from falling through [Fits Your Vehicle] Water pump sprocket retainer holding tool is compatible with 2.2L Ecotec motors found in GM, Vauxhall, and OPEL vehicles [Built to Last] Heavy-duty steel provides maximum strength and durability while the black-oxide finish resists corrosion; Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth [Package Contents] Each water pump pulley holder tool includes (1) water pump holding tool and (3) 5.5mm water pump bolts with 1.4-inch (3.5cm) length
  • Yuesstloo Water Pump Sprocket Retainer Holding Tool, Compatible with Buick Chevrolet GM Ecotec Opel 2.2 2.4 Engine
    Bestseller #1
    Yuesstloo Water Pump Sprocket Retainer Holding Tool, Compatible with Buick Chevrolet GM Ecotec Opel 2.2 2.4 Engine (17)
      Yuesstloo water pump holder tool is used to change your water pump, hold timing chain in place, keep parts from falling into the timing chain cover, avoid camshaft readjustments. Compatible with GM Vauxhall OPEL Chevrolet 2.2L 2.4L Ecotec engine, Compatible with Oldsmobile Pontiac Saab and Saturn Platforms. Easy to Use: Simply remove the access plate from the front cover and install the tool, line up holes on the water pump tool to your sprocket. Made of high-quality carbon steel, high hardness, not easy to break. The exterior is coated with black antioxidant layer, durable to use. 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority.
  • MGPRO New Replacements Water Pump Sprocket Holding Tool Ecotec 2.0L 2.2L 2.5L Timing Chain W89210
    Bestseller #1
    MGPRO New Replacements Water Pump Sprocket Holding Tool Ecotec 2.0L 2.2L 2.5L Timing Chain W89210 (67)
      Water Pump Sprocket Holding Tool GM Ecotec 2.0L 2.2L 2.5L Timing Chain Tool Usage: Designed to be installed over the timing cover and hold the sprocket in place.This allows the water pump to be removed without disturbing the timing chain Wear and Tear: Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase! Part#: W89210,1AXAA00140 Warranty: Lifetime
  • Water Pump Sprocket Holding Tool GM Ecotec 2.0L 2.2L 2.5L Timing Chain Compatible with Buick
    Bestseller #1
    Water Pump Sprocket Holding Tool GM Ecotec 2.0L 2.2L 2.5L Timing Chain Compatible with Buick (1549)
      Fitment Notes: Fitment Notes
      2.4L 2384CC 145Cu. In. l4 FLEX DOHC Naturally Aspirated Direct fit replacement Installs the same as factory unit Same dimensions as Original Part
  • GM 2.2 2.4L Water Pump Sprocket Retainer Ecotec 4 cylinder Cobalt Saturn Chevy
    Bestseller #1
    GM 2.2 2.4L Water Pump Sprocket Retainer Ecotec 4 cylinder Cobalt Saturn Chevy (245)
      An excellent quality (alternative to the Kent Moore J-43651) water pump holding tool that retains the coolant pump sprocket that is part of the timing chain system in position, during pump removal / installation, without the timing chain being disturbed and without the need to remove the front timing cover thus thus eliminating the need to re-time the camshafts.
  • BOERLKY AUTO PART Water Pump Sprocket Holding Tool Ecotec 2.0L 2.2L 2.5L Timing Chain R149-W89210
    Bestseller #1
    BOERLKY AUTO PART Water Pump Sprocket Holding Tool Ecotec 2.0L 2.2L 2.5L Timing Chain R149-W89210 (14)
      Tool Usage: Designed to be installed over the timing cover and hold the sprocket in place. This allows the water pump to be removed without disturbing the timing chain Wear and Tear: This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. This warranty covers the cost of the part only. Fits: 2012-16 LaCrosse L4 2.4L Main Water Pump Sprocket Holding Tool; 2010-11 LaCrosse L4 2.4L Water Pump Sprocket Holding Tool; 2012-15 Regal L4 2.4L Main Water Pump Sprocket Holding Tool; 2011-13 Regal L4 2.0L Water Pump Sprocket Holding Tool; 2011 Regal L4 2.4L Water Pump Sprocket Holding Tool; 2012-17 Verano Water Pump Sprocket Holding Tool; 2003-05 Cavalier L4 2.2L Water Pump Sprocket Holding Tool; 2002 Cavalier L4 2.2L (8th Vin Digit F) Water Pump Sprocket Holding Tool
  • Lisle 13800 Water Pump Sprocket Holder For GM Ecotec
    Bestseller #1
    Lisle 13800 Water Pump Sprocket Holder For GM Ecotec (386)
      Holds the timing chain and gear in place For removing or installing water pump For Ecotec engines
  • Also read Nitrous progressive controller Also read Cane four feet Also read Car high pressure cleaning tool Also read Christmas leggings for little girls

Leave a Reply

Your email address will not be published. Required fields are marked *